With AOI Exchange, developers can purchase pre-built PLC & HMI modules from approved vendors in our marketplace. Save countless hours of development time on your next project.Browse Modules
The module is used to control a fixed speed motor with all alarms and faults interlock.
25.00 (CAD)
Low Level Alarm
This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.
10.00 (CAD)
High Level Alarm
This module sets an alarm when the measured value exceeds the High Level setpoint for longer than the Time value.
10.00 (CAD)
FO16On
Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.
25.00 (CAD)
First In
This module captures the first channel that goes into alarm.
25.00 (CAD)
DI1_OK_ALARM
When your Digital input has an OK state and Alarm state, you need to process it before you shall use it. For example, Safety System, Lift Door, Emergency Switch, an application where input states false or low shall give an alarm.