PLC Only

Function that is used in the PLC code but does not required a HMI graphical interface.

Picture of SequenceProcessTemplate
SequenceProcessTemplate

The program is designed to govern any sequential order of tasks done by outputs with basic feedback from inputs.

25.00 (CAD)
Picture of High Level Alarm
High Level Alarm

This module sets an alarm when the measured value exceeds the High Level setpoint for longer than the Time value.

10.00 (CAD)
Picture of Low Level Alarm
Low Level Alarm

This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.

10.00 (CAD)
Picture of First In
First In

This module captures the first channel that goes into alarm.

25.00 (CAD)
Picture of Analog Module
Analog Module

The module scales the raw input to the Engineering Range and creates High High, High, Low and Low Low alarms.

25.00 (CAD)
Picture of First Out
First Out

This module monitors the status of 16 discrete inputs and sets the Alarm Channel No to the value of the input channel that first goes into alarm.

25.00 (CAD)