With AOI Exchange, developers can purchase pre-built PLC & HMI modules from approved vendors in our marketplace. Save countless hours of development time on your next project.Browse Modules
This module copies the state of the inputs to the outputs when enabled. Default state is off.
25.00 (CAD)
FlowConvMass
Flow Rate Conversion (Mass)
25.00 (CAD)
FlowConvVolume
Flow Rate Conversion (Volume)
25.00 (CAD)
TempCorForK
Temperature Conversion
25.00 (CAD)
Gate16ON
When the module is enabled the state of the 16 discrete inputs is copied to the outputs.
25.00 (CAD)
Latch16Off
Used for latch an output OFF when the corresponding input to the module goes OFF.
25.00 (CAD)
Latch16On
Used for latch an output ON when the corresponding input to the module goes ON.
25.00 (CAD)
FO16On
Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.
25.00 (CAD)
BNOT16
The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).