PLC Only

Function that is used in the PLC code but does not required a HMI graphical interface.

Picture of Gage RR
Gage RR

The module stores a set of values (e.g. measurement) and provides their maximum, minimum and average values .

25.00 (CAD)
Picture of Gate16Off
Gate16Off

This module copies the state of the inputs to the outputs when enabled. Default state is off.

25.00 (CAD)
Picture of Gate16ON
Gate16ON

When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

25.00 (CAD)
Picture of Global Timer RTO
Global Timer RTO

This module converts a timer value (DINT) to a string value for display on an HMI.

25.00 (CAD)
Picture of High Level Alarm
High Level Alarm

This module sets an alarm when the measured value exceeds the High Level setpoint for longer than the Time value.

10.00 (CAD)
IC_MOV_2P
IC_MOV_2P

IC_MOV_2P Add On Instruction can be used for the control of 02-Poisition (Open/) motorized valve. In addition to the full control of motorized valve , this instruction generates Failure Alarms to enable device diagnostics and allow plant operators to perform maintenance if the valve is jammed or locked.

10.00 (CAD)
Picture of Industrial Safety Door
Industrial Safety Door

The Add On Instruction is used for the control of an Industrial Safety Gate (Euchner MGB series).

25.00 (CAD)
Picture of Input Bypass
Input Bypass

The module provides an alarm bypass function for Analog and discrete inputs.

25.00 (CAD)
INT_TO_BIT
Integer to Bit

Integer Value Move to BIT status (Version Studio5000 V32.02)

10.00 (CAD)