PLC Only

Function that is used in the PLC code but does not required a HMI graphical interface.

Result
TYPICAL ANALOG INPUT

Takes the input from the analog card.Outputs a scaled value and HH/HI/LO/LL alarms. Can be imported as a library and it will create all the variables automatically or can be imported as a AOI.

15.00 (CAD)
Picture of Stability checker
Stability checker

Determines if a value stays within a % range for an amount of time and returns TRUE when it does. Useful for applications in weighting quantities

15.00 (CAD)
Picture of SetBitCounter
SetBitCounter

This add-on instruction counts the number of HIGH bit/s in an integer (INT) or double integer (DINT). Counter that counts anything that can become active at the same time and recounts if anything changes.

15.00 (CAD)
Picture of CM_DI
CM_DI

The Digital Input AOI Control Module is used for general-purpose discrete inputs. Note: Programmed followed ISA88, ISA95, and ISA106 Standard

15.00 (CAD)
Picture of Ramp function
Ramp function

Ramp block that generates a ramp using acceleration and deceleration values defined by user.

15.00 (CAD)
Picture of Limit real
Limit real

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

15.00 (CAD)
AIM
TYPICAL ANALOG INPUT with M.O.S.

Takes the input from the analog card. Outputs a scaled value and HH/HI/LO/LL alarms. Maintenance override switch functionality.

19.99 (CAD)
FC valve AOI
TYPICAL FC VALVE

Contains a typical for digital Fail Close Valves with 1 solenoid and 2 limit switches. The valve closes if it is tripped or a command to close is set on it. Can receive manual operations like opening and closing the valve from a button(on the HMI).

19.99 (CAD)
Picture of SensCom
SensCom

The AOI provides a sensor signal to be treated according to its authenticity proof. The AOI is mainly developed to be used with any industrial protocol sensor/gateway/module (ex. Modbus sensor/gateway, remote IO etc), but could be used with any analog measured value.

20.00 (CAD)