When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

This module copies the state of the inputs to the outputs when enabled. Default state is off.

The module stores a set of values (e.g. measurement) and provides their maximum, minimum and average values .

This module converts an analog value to its exponent (i.e exp + mantissa).

Works exactly like a for do loop in higher programming language but used in ladder logic

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

Use this control module to control output as on/off flashing output. An example may be 1s on, 2s Off flashlight. it also can be used for flashing a bit in HMI with set time durations.

Flashes an output based on user specified time values.

This module monitors the status of 16 discrete inputs and sets the Alarm Channel No to the value of the input channel that first goes into alarm.