Bill Wallace


Be the first to review this module

Used for latch an output OFF when the corresponding input to the module goes OFF.

25.00 (CAD)

The module is used to latch any of the 16 discrete outputs to an OFF state (i.e. logical 0) when the corresponding input channel is set to the OFF state. The outputs remain OFF until the reset is cycled.

The module can be used to capture conditions that are only active for a short duartion. This may be used when troubleshooting the reason for trip condition , which is not captured by other program logic.  

PLC Code written in RSLogix 20.04



Customers who bought this item also bought

Picture of Gate16ON

When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

25.00 (CAD)
Picture of FlowConvMass

Flow Rate Conversion (Mass)

25.00 (CAD)
BNot16 function block

The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).

25.00 (CAD)

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

25.00 (CAD)