Bypass Control

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

This module copies the state of the inputs to the outputs when enabled. Default state is off.

When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

Used for latch an output OFF when the corresponding input to the module goes OFF.

Used for latch an output ON when the corresponding input to the module goes ON.

The module selects the high, low or average value of 5 analog inputs.

Used to replace standard faceplate in PlantPAX 2.0

Used to replace standard faceplate in PlantPAX 2.0