The module decreases a value when triggered.

Ramp block that generates a ramp using acceleration and deceleration values defined by user.

Ramp Function Generator

This module generates a random number (data type: Real) between 0 and 1.

This module allows recipes to be slected and stored in a PLC. An HMI application is included for FactoryTalk ME.

Reference signal generator creating output value from preset during the time period.

The module reverses an ASCII string.

The module is used to create the runtime value for a condition.

SCALE_AI Add on instruction converts raw value from Analog Input channel to engineering value and in addition presents several alarms based on user configuration, including Hi, HiHi, Lo and LoLo Alarms.

Analog Raw Value from Sensors Scaling to real Value

Scantime function that can return scantime cycle in microseconds, milliseconds and/or seconds.

This is a converted function block from the RS Logix 500 SCP instruction with added features. For STEP 7 V5.x (S7-300 & S7-400 PLCs)

This block selects between the first or the second group of real variables.

The AOI provides a sensor signal to be treated according to its authenticity proof. The AOI is mainly developed to be used with any industrial protocol sensor/gateway/module (ex. Modbus sensor/gateway, remote IO etc), but could be used with any analog measured value.

The program is designed to govern any sequential order of tasks done by outputs with basic feedback from inputs.

Ladder logic code for sequencing applications. A universal code structure that can be used for all sequences. Built in RSLogix Ver 20, so should be compatible with most programming versions.

This module allow for the run time value of a piece of equipment (e.g. pump) to be recorded for a maximum of 3 shifts.

The instruction uses to toggle the signal

This modules sorts 10 real values into order, either highest-to-lowest or lowest-to-highest.

Spin coating is a technique used to spread uniform thin films on flat substrates by centrifugal force. Spin Coater ladder language programming and Human Machine Interface using PLC and touch panel

The module controls heat zones (digital ouput) by using a PID control block.