All Products

View all the products
Picture of CM_AO
CM_AO

The Analog Output AOI Control Module is used to condition an engineering unit analog output value into the proper range for analog output modules and devices. Note: Programmed followed ISA88, ISA95 and ISA106 Standard

30.00 (CAD)
Picture of CM_AI
CM_AI

The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

35.00 (CAD)
Picture of Characterizer Output
Characterizer Output

A variable input that you want a non-linear varied output.

12.38 (CAD)
Picture of ChangeOver_Block
ChangeOver_Block

Device change over if one duty and one standby device. PLCOpen XML file developed for Schneider Electric M251 PLC. And it's compatible with M241 and M262 PLCs also.

25.00 (CAD)
Picture of BypCntrl
BypCntrl

Bypass Control

20.00 (CAD)
BNot16 function block
BNOT16

The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).

25.00 (CAD)
Picture of Bit to Integer
Bit to Integer

The module populates the status of bits into a integer.

10.00 (CAD)
Picture of Bang-Bang Control
Bang-Bang Control

The module provides On-Off control based on 2 setpoints.

25.00 (CAD)
Picture of Automated_Gate_System_v1.0
Automated_Gate_System_v1.0

This AOI can be used to automate a gate system with either one or two gates. The type of gate (sliding door or swing door) does not matter. For safety purposes, a safety scanner input is also integrated into the system.

30.00 (CAD)
Picture of Anti Fire Fighting Sprinkle System
Anti Fire Fighting Sprinkle System

This module is for anti fire fighting sprinkle system. It consists of one pressure switch and two pumps controlled via VFD.

50.00 (CAD)
Picture of Analyze_Real8_AOI
Analyze_Real8_AOI

8 input REAL value, find minimum. maximun and average. Except 0 if input value = 0, it won't be counted in sum and average

5.00 (CAD)
Picture of AnalogFB
AnalogFB

This module provide analog scaling and alarming for an input with an raw value of 0-27648 (4-20 ma).

25.00 (CAD)
Picture of Analog_Input_Scaled
Analog_Input_Scaled

Scales analog input

25.00 (CAD)
Picture of Analog output
Analog output

A comprehensive Analog output module providing different features.

20.00 (CAD)
Picture of Analog Module
Analog Module

The module scales the raw input to the Engineering Range and creates High High, High, Low and Low Low alarms.

25.00 (CAD)
Picture of Analog  Input
Analog Input

A comprehensive Analog Input module providing many features.

20.00 (CAD)
Picture of AB PV800 HMI and Siemens S7-1214 communication
AB PV800 HMI and Siemens S7-1214 communication

In this project AB HMI PV800 connect to Siemens S7-1214 PLC on MODBUS TCP/IP communication, and also this project has browser based scada (HMS EWON flexy 202 with GSM card and Viewon)

200.00 (CAD)
Picture of 1oo2 (1 out of 2) Analog Module
1oo2 (1 out of 2) Analog Module

The module processes the 2 analog inputs and provides one analog output.

25.00 (CAD)