All Products

View all the products
Picture of Multiplexer 8 boolean-real
Multiplexer 8 boolean-real

This block is a multiplexer function. When a single input is on, the corresponding single output real value will be on.

20.00 (CAD)
Picture of MSD
MSD

This module controls a Motorized Smoke Dampers used in Environmental control systems.

25.00 (CAD)
Picture of MOV Status
MOV Status

This module is used to condition the status of a Motor Operated Valve.

25.00 (CAD)
Picture of Motor_DOL
Motor_DOL

This module provides comprehensive control function for a Direct On Line motor.

25.00 (CAD)
Picture of Motor Control Fixed Speed
Motor Control Fixed Speed

The module is used to control a motor in Manual or Automatic mode.

25.00 (CAD)
Picture of Motor Control Basic
Motor Control Basic

The module is used to control a fixed speed motor.

25.00 (CAD)
Picture of Motor Control
Motor Control

The module provides motor control with thermal overload and HMI Faceplate.

25.00 (CAD)
Picture of Motor (Fixed Speed)
Motor (Fixed Speed)

This AOI controls a single speed motor and is interfaced with a HMI graphic.

25.00 (CAD)
Picture of Motor
Motor

Module for control motor in 2 directions

15.00 (CAD)
Picture of Motor
Motor

The module is used to control a fixed speed motor with all alarms and faults interlock.

25.00 (CAD)
Picture of Module Network Monitor
Module Network Monitor

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

25.00 (CAD)
Picture of Machine_run_time
Machine_run_time

This piece of code is provided as a ladder coded Routine.

3.00 (CAD)
Picture of LowHighAverageSelect
LowHighAverageSelect

The module selects the high, low or average value of 5 analog inputs.

25.00 (CAD)
Picture of Low Level Alarm
Low Level Alarm

This module sets an alarm when the measured value falls below the Low Level setpoint for longer than the Time value.

10.00 (CAD)
Picture of Loop (Value Incrementor)
Loop (Value Incrementor)

This module increases a value based on step size and time interval.

25.00 (CAD)
Picture of Limit real
Limit real

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

15.00 (CAD)
Picture of Level Maintainer (Schneider)
Level Maintainer (Schneider)

This module is Used to Maintain Water or oil between some Levels

25.00 (CAD)
Picture of Leak Detection
Leak Detection

The module periodically grabs data (digital and Analog) and stores the data in a buffer with timestamp.

25.00 (CAD)
Picture of Latch16On
Latch16On

Used for latch an output ON when the corresponding input to the module goes ON.

25.00 (CAD)
Picture of Latch16Off
Latch16Off

Used for latch an output OFF when the corresponding input to the module goes OFF.

25.00 (CAD)
Picture of Julian Day of Year
Julian Day of Year

The module determines the day of the year and presents the value as a string.

25.00 (CAD)