All Products

View all the products
Picture of CM_VALVE
CM_VALVE

The Valve AOI Control Module can handle a spring return fail open, spring return fail close, or fail last valve. The valve can have one or two solenoids. It can have an open limit switch, or not. It can have a close limit switch, or not. Note: Programmed followed ISA88, ISA95, and ISA106 Standard

25.00 (CAD)
Picture of ChangeOver_Block
ChangeOver_Block

Device change over if one duty and one standby device. PLCOpen XML file developed for Schneider Electric M251 PLC. And it's compatible with M241 and M262 PLCs also.

25.00 (CAD)
Picture of Sequencer
Sequencer

Ladder logic code for sequencing applications. A universal code structure that can be used for all sequences. Built in RSLogix Ver 20, so should be compatible with most programming versions.

25.00 (CAD)
Picture of Automated_Gate_System_v1.0
Automated_Gate_System_v1.0

This AOI can be used to automate a gate system with either one or two gates. The type of gate (sliding door or swing door) does not matter. For safety purposes, a safety scanner input is also integrated into the system.

30.00 (CAD)
Product Barcode_SerialNos_Validation_IndirectAddressing
Product Barcode_SerialNos_Validation_IndirectAddressing

Indirect Addressing Concept For Scanning No.of Products to Avoid Duplicate Barcode Number when products are travelling through conveyor

30.00 (CAD)
Picture of CM_AO
CM_AO

The Analog Output AOI Control Module is used to condition an engineering unit analog output value into the proper range for analog output modules and devices. Note: Programmed followed ISA88, ISA95 and ISA106 Standard

30.00 (CAD)
Picture of For_Do_Loop_AOI
For_Do_Loop_AOI

Works exactly like a for do loop in higher programming language but used in ladder logic

30.00 (CAD)
Picture of Integrator
Integrator

This function integrates anything you may need. Just set the parameters and you will have the output ready to use.

35.00 (CAD)
Picture of CM_AI
CM_AI

The Analog Input AOI Control Module is used to condition analog input signals into usable values for indication, control, and/or alarming by components of the PLC program or other systems (HMI, MES, etc.) Note: Programmed followed ISA88, ISA95 and ISA106 Standard

35.00 (CAD)
Picture of PAx 2.0 HMI Simplified Lib 001
PAx 2.0 HMI Simplified Lib 001

Used to replace standard faceplates in PlantPAX 2.0

50.00 (CAD)
SCP_STEP7_V5.x
SCP Instruction for STEP 7 V5.x (S7-300 & S7-400)

This is a converted function block from the RS Logix 500 SCP instruction with added features. For STEP 7 V5.x (S7-300 & S7-400 PLCs)

50.00 (CAD)
Picture of Anti Fire Fighting Sprinkle System
Anti Fire Fighting Sprinkle System

This module is for anti fire fighting sprinkle system. It consists of one pressure switch and two pumps controlled via VFD.

50.00 (CAD)
Picture of eTech_DOW_Date_AOI - ( RS/Studio5000)
eTech_DOW_Date_AOI - ( RS/Studio5000)

Studio 5000 - Rockwell Automation AOI Outputs - Julian Day, Day of Week, Is Leap Year and Current CPU Date/TIME

50.00 (CAD)
Picture of Digital control of proportional flow control valves for smooth acceleration and decceleration of several actuators
Digital control of proportional flow control valves for smooth acceleration and decceleration of several actuators

User-defined function block for CCW aimed at controlling hydraulic systems comprising of a single general proportional control valve and up to 4 bidirectional 4/3 on/off valves.

60.00 (CAD)
Picture of AB PV800 HMI and Siemens S7-1214 communication
AB PV800 HMI and Siemens S7-1214 communication

In this project AB HMI PV800 connect to Siemens S7-1214 PLC on MODBUS TCP/IP communication, and also this project has browser based scada (HMS EWON flexy 202 with GSM card and Viewon)

200.00 (CAD)
Picture of Spin Coater PLC Code & HMI
Spin Coater PLC Code & HMI

Spin coating is a technique used to spread uniform thin films on flat substrates by centrifugal force. Spin Coater ladder language programming and Human Machine Interface using PLC and touch panel

252.00 (CAD)