Indirect Addressing Concept For Scanning No.of Products to Avoid Duplicate Barcode Number when products are travelling through conveyor

The AOI provides a sensor signal to be treated according to its authenticity proof. The AOI is mainly developed to be used with any industrial protocol sensor/gateway/module (ex. Modbus sensor/gateway, remote IO etc), but could be used with any analog measured value.

The module produces a pulsed output based on the two input parameters.

The module determines the day of the year and presents the value as a string.

This AOI is to be used in order to monitor and check for any Data interruption between the MAIN CPU and the selected connected MODULE.

Contains a typical for digital Fail Close Valves with 1 solenoid and 2 limit switches. The valve closes if it is tripped or a command to close is set on it. Can receive manual operations like opening and closing the valve from a button(on the HMI).

reads the PLC date and returns a value from 1 to 7 as an integer value for the day of the week

Takes the input from the analog card. Outputs a scaled value and HH/HI/LO/LL alarms. Maintenance override switch functionality.

Takes the input from the analog card.Outputs a scaled value and HH/HI/LO/LL alarms. Can be imported as a library and it will create all the variables automatically or can be imported as a AOI.

The module provides On-Off control based on 2 setpoints.

This module records the number of events in a 1 hour period.

This module is used to interface the data read from and written to a E3Plus Relay using DeviseNet.\