Contains a typical for digital Fail Close Valves with 1 solenoid and 2 limit switches. The valve closes if it is tripped or a command to close is set on it. Can receive manual operations like opening and closing the valve from a button(on the HMI).

Bypass Control

Analog Raw Value from Sensors Scaling to real Value

A comprehensive Analog Input module providing many features.

A comprehensive Analog output module providing different features.

Ramp Function Generator

This block is a multiplexer function. When a single input is on, the corresponding single output real value will be on.

This block selects between the first or the second group of real variables.

The AOI provides a sensor signal to be treated according to its authenticity proof. The AOI is mainly developed to be used with any industrial protocol sensor/gateway/module (ex. Modbus sensor/gateway, remote IO etc), but could be used with any analog measured value.

Count the operating time of equipment

Digital Output Control Module Note: Programmed followed ISA88, ISA95, and ISA106 Standard

This module is for Mitsubishi Fx3U and is built on GX works tools in function block diagram This totalizer will totalize the flow rate. The totalizer will auto reset at user's defined value as well user controlled reset is also given.