All Products

View all the products
Picture of Pulse Width Modulator (PWM)
Pulse Width Modulator (PWM)

The module produces a pulsed output based on the two input parameters.

25.00 (CAD)
Picture of Ramp Down
Ramp Down

The module decreases a value when triggered.

25.00 (CAD)
Picture of Double Block & Bleed Tightness Test
Double Block & Bleed Tightness Test

The module is used to prove the seal of a valve.

25.00 (CAD)
Global object, faceplate and AOI
INTERLOCK_32x1

This package is a complete solution that allows fast development and configuration of interlocks, a task that normally takes a lot of time. This works with 32 inputs and comes with four faceplate's sizes suitable for all types of HMI and SCADA systems.

25.00 (CAD)
Picture of Leak Detection
Leak Detection

The module periodically grabs data (digital and Analog) and stores the data in a buffer with timestamp.

25.00 (CAD)
Picture of CycleTime
CycleTime

count the operating time of equipment in 1 cycle from ON to OFF

25.00 (CAD)
Picture of Level Maintainer (Schneider)
Level Maintainer (Schneider)

This module is Used to Maintain Water or oil between some Levels

25.00 (CAD)
Signal generator block in ladder logic
Referance signal generator

Reference signal generator creating output value from preset during the time period.

25.00 (CAD)
Picture of CM_VALVE
CM_VALVE

The Valve AOI Control Module can handle a spring return fail open, spring return fail close, or fail last valve. The valve can have one or two solenoids. It can have an open limit switch, or not. It can have a close limit switch, or not. Note: Programmed followed ISA88, ISA95, and ISA106 Standard

25.00 (CAD)
Picture of ChangeOver_Block
ChangeOver_Block

Device change over if one duty and one standby device. PLCOpen XML file developed for Schneider Electric M251 PLC. And it's compatible with M241 and M262 PLCs also.

25.00 (CAD)
Picture of Sequencer
Sequencer

Ladder logic code for sequencing applications. A universal code structure that can be used for all sequences. Built in RSLogix Ver 20, so should be compatible with most programming versions.

25.00 (CAD)
Picture of Automated_Gate_System_v1.0
Automated_Gate_System_v1.0

This AOI can be used to automate a gate system with either one or two gates. The type of gate (sliding door or swing door) does not matter. For safety purposes, a safety scanner input is also integrated into the system.

30.00 (CAD)