The module processes the 2 analog inputs and provides one analog output.

A comprehensive Analog Input module providing many features.

A comprehensive Analog output module providing different features.

The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).

AOI for 1 in 2 out Linear Cylinder Control and fault report.

AOI for 2 in 1 Out Linear Cylinder Control and fault report.

AOI for 2 in 2 out Linear Cylinder Control and fault report.

Flow Rate Conversion (Mass)

Flow Rate Conversion (Volume)

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

This module copies the state of the inputs to the outputs when enabled. Default state is off.

When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

The Add On Instruction is used for the control of an Industrial Safety Gate (Euchner MGB series).

This package is a complete solution that allows fast development and configuration of interlocks, a task that normally takes a lot of time. This works with 32 inputs and comes with four faceplate's sizes suitable for all types of HMI and SCADA systems.

Used for latch an output OFF when the corresponding input to the module goes OFF.

Used for latch an output ON when the corresponding input to the module goes ON.

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

The module provides motor control with thermal overload and HMI Faceplate.