Elapse/Remaining Timers accumulated values conversion in clock format .

This block limits an input depending on the configured high and low values and transfer the value to the output depending on the limits.

A comprehensive Analog Input module providing many features.

A comprehensive Analog output module providing different features.

The BNOT16 block allows up to 16 Boolean conditions to be inverted. By using the BNOT16 block in application code the required inversion of signals is clearly shown within the Function Block Diagram (FBD).

Used for First Out tripping and alarming. Inputs are set are set high to cause trip/alarm.

Used for latch an output ON when the corresponding input to the module goes ON.

Used for latch an output OFF when the corresponding input to the module goes OFF.

When the module is enabled the state of the 16 discrete inputs is copied to the outputs.

Temperature Conversion

Flow Rate Conversion (Volume)

Flow Rate Conversion (Mass)

This module copies the state of the inputs to the outputs when enabled. Default state is off.

AOI for 2 in 2 out Linear Cylinder Control and fault report.

AOI for 1 in 2 out Linear Cylinder Control and fault report.

AOI for 2 in 1 Out Linear Cylinder Control and fault report.

The Add On Instruction is used for the control of an Industrial Safety Gate (Euchner MGB series).

The module processes the 2 analog inputs and provides one analog output.