Bill Wallace

LowHighAverageSelect

Be the first to review this module

The module selects the high, low or average value of 5 analog inputs.

25.00 (CAD)

The module allows for a maximum of 5 analog channels to be used. The number of inputs must be specified, and the channels must be used starting at channel 1 with additional inputs being added using subsequent channels.

The bad channel pin is used to remove a channel from the calculation. E.g. an analog input that is outside the 4-20 mA range would be removed from the averaging logic value.

The Fail Value is used if all the channels used by the block are found to be bad.

The logic was built in Studio 5000 Version 30